This page is not intended to be a substitute for professional geotechnical advice and should not be relied on as geotechnical advice by individuals or other professionals to make site-specific decisions. Always seek advice from professional geotechnical engineers.

Slope stability assessment is to understand how much stress a slope can endure before collapsing. Civil and geotechnical engineers need to analyse and start projects like roads, embankments, dams, and excavated slopes. The slope stability analysis is to assess soil mechanics and plan for future stabilisation efforts.

Slope Stability Analysis

Based on the project, slope stability or landslide hazard assessment will be part of the site investigation. The analysis can help reveal the potential indicators of the slope future.

Topography: Evaluating the slope’s height differences at all points in the terrain

Material capacity: Determining which building approach will be apt for the proposed slope

Vegetation: Related to the area’s plants and grass contribution

There are various methods for conducting slope stability assessment with 3D and 2D numerical modelling. These two methods are used when the slope gets involved with complex geometry and validates proposed design solutions.

After slope stability assessment, geotechnical engineers can provide advice on the necessary steps to ensure the slope withstands long-time pressures and climate conditions.

Slope stabilization methods

Concerns will arise during the slope stability assessment; there are many methods for slope stabilization.

Earthwork

Steeper inclines are susceptible to failure, so civil engineers and geotechnical engineers work on benching the slope, flattening, and buttressing in the right way.

Drainage alterations:

Water is the issue for slope slippage. During the flash floods, improvements divert water through catch basins and remove the excess drainage by subsurface drains. Slope Stability Assessment in Sydney from BHM geotechnical will help you out getting the entire report.

Structural changes:

Engineers devised various ways to develop the slope stability with structural enhancements such as tiebacks, soil nailing, retaining walls, and drafted shafts.

BHM geotechnical slope stability assessment in Sydney helps prevent slope failures and the team at BHM applies the latest technologies and assessments to give you a comprehensive geotechnical report of your site.